|
Post by Rapetou33 on Jun 13, 2014 3:31:09 GMT -5
Yesterday, I plugged my intellivision and it works pretty good regarding its status of "sleeping beauty" Except the colors : When I turn it on, theres only a B/W screen. If I touch a bit the antenna cable, colors sometimes gets back and remains but not at each time . In your opinion, is this a loose connection (antenna cable) or is an electronic component faulty ? Thanks for your help.
|
|
|
Post by TrekMD on Jun 13, 2014 6:06:16 GMT -5
I wonder if your antenna cable is broken. By moving it you may restore the contact of the internal wires for a short time.
|
|
|
Post by Rapetou33 on Jun 13, 2014 8:06:36 GMT -5
Yes I will replace the cable firstly and see if there is something changed. Thks.
|
|
|
Post by TrekMD on Jun 13, 2014 12:38:10 GMT -5
The original cables for the Intellivision seem to have lots of trouble. I use another cable I got because the original one just gives me a very snowy image.
|
|
|
Post by Rapetou33 on Jun 14, 2014 11:59:43 GMT -5
I have replaced the cable but seems it's not the cause. Must be the antenna plug itself at the back of the console. i will open the console again and try to see what I can do.
|
|
|
Post by TrekMD on Jun 14, 2014 12:01:48 GMT -5
Ah, that sucks. Hopefully it is something easy to fix.
|
|
|
Post by Rapetou33 on Jun 15, 2014 10:31:48 GMT -5
I have opened the console but cannot reach the plug and the PCbs without unsoldering. I won't do it because too risky (considering the potential gain). So I am going (to try) to fix the loose connection with adh. tape : ugly but end justifies the means, doesn'it? (I will yet do it properly). Thanks TrekMD, if you have any ideas, I take them.
|
|
|
Post by TrekMD on Jun 15, 2014 12:29:32 GMT -5
Hey, if it works, go with it.
|
|
jammajup
Vector Runner
multi-format retro gamer
Posts: 47
|
Post by jammajup on Jun 28, 2014 16:11:18 GMT -5
I have not seen the inside of an Intellivision but it does sound like either a bad solder joint that needs resoldering or a break in a tv modulator or something, obvious once spotted.
|
|
|
Post by Rapetou33 on Jul 2, 2014 17:57:37 GMT -5
I have not seen the inside of an Intellivision but it does sound like either a bad solder joint that needs resoldering or a break in a tv modulator or something, obvious once spotted. thanks! Gonna have a look again.
|
|