|
|
Post by lucifershalo on Oct 22, 2020 1:02:39 GMT -5
Hello, I dont have anymore the loader program to be installed on PC , to load games on the SD, can someone help me,
thanks
it is Richard Hutchinson's Vecmulti cart
|
|
|
|
Post by Peer on Oct 22, 2020 2:06:15 GMT -5
Hello, I dont have anymore the loader program to be installed on PC , to load games on the SD, can someone help me, thanks it is Richard Hutchinson's Vecmulti cart VecFlash needs a loader program on PC, but as far as I recall VecMulti is just "remove SD from VecMulti, put SD into PC, copy files to SD, unplug and put SD back into VecMulti".
Cheers, Peer
|
|
|
|
Post by lucifershalo on Oct 22, 2020 6:36:33 GMT -5
no it is not, not just plug and load
|
|
|
|
Post by Peer on Oct 22, 2020 7:34:49 GMT -5
no it is not, not just plug and load I will check later tonight when I am back at home.
Cheers, Peer
|
|
|
|
Post by Peer on Oct 22, 2020 9:27:32 GMT -5
I checked, and it is a combination of both. There is a menu maker software (Windows executable) on the SD which creates the boot menu from the games copied to the SD. PM me your email, and I'll be happy to send you a copy.
Cheers, Peer
|
|
|
|
Post by VECTREXER on Oct 22, 2020 13:12:35 GMT -5
Hello, I dont have anymore the loader program to be installed on PC , to load games on the SD, can someone help me, thanks it is Richard Hutchinson's Vecmulti cart Here is a Google Drive Link to the current contents of Richard Hutchinson's VectMulti multicart from a January 2020 shipment. The link from from my storage on Google. The MenuMaker and VecMulti tool and utility are included. .\MenuMaker.exe - menu title list update tool used to add or remove an on screen menu entry after a game binary change in ".\Games\" on the micro SD card. .\Utils\VecMulti.exe - file loader for use in dev mode. Assumes a USB / serial convertor is connected to VecMulti. drive.google.com/drive/folders/1i4esd9cHz6_MpK7IIlF1uLZ_v-YfwqX2 |
|
|
|
Post by Peer on Oct 22, 2020 23:41:19 GMT -5
.\Utils\VecMulti.exe - file loader for use in dev mode. Assumes a USB / serial convertor is connected to VecMulti. Are there different versions of VecMulti? Mine does not have any USB port. Only the SD slot. No other ports in the 3D printed casing.
Cheers, Peer
|
|
|
|
Post by VECTREXER on Oct 23, 2020 3:01:37 GMT -5
.\Utils\VecMulti.exe - file loader for use in dev mode. Assumes a USB / serial convertor is connected to VecMulti. Are there different versions of VecMulti? Mine does not have any USB port. Only the SD slot. No other ports in the 3D printed casing. Cheers, Peer
All VecMulti have a set of pads to install a set of header pins, or to use for direct connection. This is used for a serial connection to VecMulti. It's is up to the user to provide a USB-to-Serial convertor for connection to VecMulti. On the board the row of pads for the serial connection is annotated with the label "DEV" at one end of the row. Here is a set of VecMulti comparison images showing the "DEV" "header location on the boards. Green arrows point to the DEV header pad set on each board.  Here is the note from the file ".\ReadMe.txt" located in the root folder of the micro SD Card. "Dev option ---------- This mode is activated when the cart is powered-up without a card inserted. It is used with the VecMulti loader software and a USB-serial adapter. Connect the dev header as follows - [top of PCB] • - PC GND • - PC TX • - PC RX • - Not connected " |
|
|
|
Post by Peer on Oct 23, 2020 7:41:33 GMT -5
VECTREXER: Great, thanks! I had never before opened the casing of my VecMulti, so I had not been aware of this.
Cheers, Peer
|
|
|
|
Post by VECTREXER on Aug 24, 2023 17:01:01 GMT -5
Since there have been some questions about the procedure to update a VecMulti with a new game, here is an answer I have recently sent out to another owner. Windows PC specific. But should be similar if using the Macintosh version of MenuMaker.
Adding games to the VecMulti cart is easy. Instructions on the process are include in the micro SD card. The process basically goes like the steps below.
• Locate the Vectrex game binary you want to add.
• Remove the micro SD card from the VecMulti cartridge. Removal is accomplished by pushing in the micro SD card to unlatch it from the socket slot.
• Place the micro SD card into your computer's memory card reader.
• Copy the Vectrex game binary onto the micro SD card in the folder with the title "\Games".
• Then in the root folder of the micro SD card ("\") locate the Microsoft Windows Vectrex Menu Compiler program named "MenuMaker.exe";.
• Run the Vectrex Menu Compiler program "MenuMaker.exe"; program. Microsoft Windows may ask you to confirm that you want to run the program. It is safe to do so.
• Shown after running the program is a single window displaying the window title "MenuMaker".
• In the MenuMaker program windows will be displayed a single button with the word "MAKE".
• Press the "MAKE" button.
• While MenuMaker program is running and building the button text will change to display the word "WORKING".
• When MenuMaker program is finished running the button text will change to display the word "FINISHED".
• Remove the micro SD card from your' computer's memory card reader.
• Insert the micro SD card into the VecMulti cartridge. Insertion of the micro SD card is completed by pushing in the micro SD card into the SD card socket slot until the micro SD card latches into socket slot. Once inserted into VecMulti the micro SD card should be flush with the cartridge case.
• Insert VecMulti into the Vectrex.
• Turn on the Vectrex.
• Wait for the Vectrex to boot up and display the VecMulti program selection menu.
• Scroll through the menu to find the Vectrex game binary added the micro SD card.
• Select the new Vectrex program and run it.
• ENJOY!
|
|
